Powerful Phosphate Remover for Pools
Our most powerful phosphate removal treatment. This best-in-class SeaKlear Phosphate Remover removes 9,000 ppb (parts per billion) orthophosphates in a single dose, in 10,000 gallons making it the optimal solution for commercial pools, service professionals, and to combat extreme phosphate problems.
Phosphates are known to be a major water pollutant. In your swimming pool they can cause numerous water quality issues including:
- Discolored cloudy water
- Poor water quality that leads to extra chemical
- Excessive scale damage to heaters
- Lower efficiency of salt generator systems
Have a question or comment about this product?
Available Sizes
32oz./946ml.
SKU: 90207SKR
1Gal./3.785L
SKU: 90336SKR
5Gal./18.9L
SKU: 90337SKR
Details
Product Education
MSDS
- Removes up to 9,000 ppb of phosphates
- Great for maintenance and treatment
- Ideal for salt systems, reduces potential of calcium phosphate scale
INSTRUCTIONS
DIRECTIONS FOR USE:
INITIAL HIGH-PHOSPHATE TREATMENT:
- Clean or backwash filter.
- Calculate the amount of product required using the dosage guide. Pour Phosphate Remover in the pool, distributing it over as wide an area as possible.
- Run your filter system continuously for at least 24 hours.
- If filter pressure Increases 10 psi over normal, clean or backwash the filter.
- After 48 hours, test the phosphate level with a phosphate test kit approved for swimming pool use. If it is needed, reapply Phosphate Remover.
WEEKLY MAINTENANCE DOSE: Use 1 oz. of Phosphate Remover per 5,000 gallons of pool water to maintain phosphate levels below 125 ppb.
Amount of phosphates in your pool (ppb)
Pool Capacity
5,000 gallon
10,000 gallon
250
1/2 oz.
1 oz.
500
1 oz.
2 oz.
1,000
2 oz.
4 oz.
3,000
6 oz.
12 oz.
4,500
8 oz.
16 oz.
9,000
16 oz.
32 oz.
Important: It is normal for this product to cause pool cloudiness, indicating that phosphates are being removed. The duration of the cloudiness will depend on phosphate levels and pool equipment, and can sometimes last up to 48 hours. While pool water is cloudy, swimming should not occur so plan your treatment accordingly. As needed, apply SeaKlear Chitosan Clarifier at a rate of 2 oz per 5,000 gallons of pool water to help clear cloudy water.
MSDS
Material Safety Data Sheets
English ↓
Spanish ↓
