Yellow Klear Algaecide Instructions


It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. All dosages are for 10,000 gallons of water. Adjust accordingly. Prior to using this product, assure water is properly balanced (pH between 7.6 and 7 .8, total alkalinity between 120 and 140 ppm).


To Remove Visible Algae Accumulations:

  1. Brush areas affected with algae accumulations.
  2. Add 4 oz (1 capful) of Yellow Klear Algaecide per 10,000 gallons close to the affected areas. For severe accumulations, add 8 oz per 10,000 gallons.
  3. To activate, add one of the following: 1 lb dry chlorinating compound (calcium hypochlorite dichloroisocyanurate), 21bs lithium hypochlorite (35%), 1 gallon sodium hypochlorite (liquid chlorinating compound) 10-12%, 2 gallons sodium hypochlorite (liquid chlorinating compound) 5.25%, or 1 lb potassium monopersulfate per 10,000 gallons of water.

Use a suitable test kit to test for residual chlorine. Ensure that the chlorine residual is 3 ppm or lower before reentering the pool.