Stain Prevention & Remover Instructions

DIRECTIONS FOR USE

Read entire label and use strictly in accordance with precautionary statements and directions.

FOR INITIAL POOL FILLING: Adjust pH between 7.2 to 7.6. For best results, use Stain Prevention & Remover in the evening with pool pump and filter operating overnight. Add 32 oz per 20,000 gallons by premixing into plastic pail of water first. Dispense solution at deep end of pool.

Cloudiness may develop with the appearance of white flakes. This is normal, indicating Stain Prevention & Remover is working. Cloudiness will resolve with consistent filtration. If cloudiness occurs, keep pool system running until it is resolved.

FOR WEEKLY MAINTENANCE DOSAGE: Add 6 oz to 8 oz per 10,000 gallons of water. Use SeaKlear® Chitosan Clarifier weekly to keep pool water crystal clear.

HARD WATER NOTE: In areas with hard water where calcium hardness exceeds 400 ppm, it is advisable to double the dosages listed above. Do not, however, increase the dosages more than double for one application.