PhosKlear 4000 Instructions


Treatment Dose: Use the dosing chart below to determine the proper amount to add based on current phosphate levels. (Example: For a 10,000 gal pool with 1,000 ppb of phosphates, use 8 oz of SeaKlear PhosKlear 4000.)

Amount of phosphates in your pool (ppb)
Pool Capacity2505001,0002,0004,000
5,000 gallon1 oz.2 oz.4 oz.8 oz.16 oz.
10,000 gallon2 oz.2 oz.8 oz.16 oz.32 oz.

Initial phosphate treatment:

  1. Clean or backwash filter.

  2. Calculate the amount of product required using the dosage guide. Pour SeaKlear PhosKlear 4000 in the pool, distributing it over as wide an area as possible. If pool water still appears cloudy after 24 hours, then treat with SeaKlear Chitosan Clarifier at a rate of 2 oz per 5,000 gal.

  3. Run your filter system continuously for at least 24 hours.

  4. If filter pressure increases 10 psi over normal, clean or backwash the filter.

  5. After 48 hours test the phosphate level with a phosphate test kit approved for swimming pool use. If it is needed, reapply SeaKlear PhosKlear 4000.

Weekly Dose: Use 2 oz of SeaKlear PhosKlear 4000 per 10,000 of pool water to control phosphate levels and keep water clear.

Important: It is normal for this product to cause pool cloudiness, indicating that phosphates are being removed. The duration of the cloudiness will depend on phosphate levels and pool equipment, and can sometimes last up to 24 hours. While pool water is cloudy, swimming should not occur so plan your treatment accordingly. As needed, apply SeaKlear Chitosan Clarifier at a rate of 2 oz per 5,000 gallons to help clear cloudy water.