Chlorine Free Shock Oxidizer Instructions

For lighter bather loads: use 1 lb. per 10,000 gallons of water every two weeks.

For heavier bather loads: use 1 lb. per 10,000 gallons of water every week.

DIRECTIONS FOR USE:

  1. With the pump running, disperse SeaKlear Chlorine-Free Shock Oxidizer into pool.
  2. Wait at least 15 minutes before entering water. In pools over 30,000 gallons, wait at least an hour before entering water.
  3. After each application, run pump and filter system continuously for six to eight hours.

This product is not a sanitizer or an algaecide. For routine disinfection, use an EPA registered product according to label directions.

Important: Always apply chemicals separately. Never combine them.